St. Simons Rose by Pine Hall Brick

This Bowling Green (KY) homeowner used St. Simons Rose by Pine Hall Brick on the exterior of their home.

The local office of Lee Brick and Block supplied the masonry materials and can help you find the perfect brick for the exterior veneer own your next home building project.

 

Here’s a closeup view of the St. Simons Rose. You can see the photo in full-screen size by clicking on it.

Stop by your nearest location of Lee Brick and Block today and check out Pine Hall’s entire line of face brick.

Yorktown By Columbus Brick Used In Cadiz (KY)

 

Back in the winter of 2005 an addition to the Cadiz First Christian Church was completed.

The design team at Perry Office of Architecture and Design, of Paducah (KY), needed to find a suitable match for the existing brick.

The Hopkinsville location of Lee Brick and Block supplied Yorktown by Columbus Brick for the exterior veneer and won the approval of the design team and the church members, as did the fine masonry work by Whit-Cor Masonry of Murray (KY).

 

The stone you see in the top photo was manufactured by Custom Cast Stone of Westfield, Indiana.

For more information on Columbus Brick products or Custom Cast Stone, contact your nearest location of Lee Brick and Block today.

Abingdon By Lawrenceville Brick

 

The brick you see in the photo above is called Abingdon and is manufactured by Lawrenceville Brick.

The Bardstown (KY) location of Lee Brick and Block supplied the builder of these condos, which are also located in Bardstown.

 

Here’s a closeup of the Abingdon’s. You can click on any of the photos for a full-screen view.

You’ll really get lots of color, texture and character if you use these brick on your next home building project.

 

Remember, the job’s not done ’til the sign gets built. And when it’s built right, it’ll have a cap on it like this one, which will help it shed water and last longer.

For more info on using Abingdon’s by Lawrenceville Brick, stop by or contact your nearest location of Lee Brick and Block today.

Inca Gold By Sioux City Brick

 

This Bowling Green (KY) homeowner is the proud owner of a home surrounded on all sides by Inca Gold from Sioux City Brick.

The local office of Lee Brick and Block supplied the masonry materials on this new home and you’ll find Sioux City Brick available at all of our locations.

 

Here’s a closeup of the Inca Gold’s from Sioux City Brick. You can click on either of the photo’s for a full-screen view.

Stop by or contact your nearest location of Lee Brick and Block today for more ideas about brick, mortar and stone combinations.

Anchor Diamond Pro Wall Units Used At KOA Campground In Shepherdsville (KY)

 

The local KOA Campground in Shepherdsville (KY) recently was enhanced by the addition of an Anchor Diamond Pro retaining wall.

The Bardstown (KY) location of Lee Brick and Block supplied the natural gray Anchor Diamond Pro units for this project.

 

The next time you have a severe slope like the one you see in the photo above, contact your nearest location of Lee Brick and Block ( in Kentucky ) or Southland Brick and Block ( in Tennessee ). Our team of experts will be there to help you decide which style, size and color will work best for your retaining wall project and then we’ll be there to see you thru to completion.

 

Whether your next retaining wall project is 4′ tall or 40′ feet tall, Anchor and Lee Brick and Block can make it a success.

Concord Thin Line Brick

 

If you ever have one of those spots where you just can’t use a full-size brick, we have a Thin Line series of brick manufactured by our Mountain Stone Products division.

The Concord Thin Line Brick you see in the photo above is one of several we have available.

For more information on styles, colors and availability of Thin Line Brick from Mountain Stone Products, visit the website or contact your nearest location of Lee Brick and Block or Southland Brick and Block today.

Belden Carolina Rose Used On The Fisher House At Ft. Campbell

 

Here’s a few photos of the new Fisher House recently completed at Ft. Campbell (KY).

The brick you see are Belden Carolina Rose and the mortar is Holcim Buff.

 

This close-up gives you a better view of the Buff mortar from Holcim and a better idea of the color and texture you’ll get if you choose the Belden Carolina Rose for the brick veneer on your next building project.

The masonry contractor, ( Forest B. ) White Masonry, of Gracey (KY), did a great job with this brick and mortar combination.

The Hopkinsville (KY) location of Lee Brick and Block supplied the masonry materials, including the Belden brick and Holcim mortar for this project.

For more information on using brick in and around the Ft. Campbell, Hopkinsville (KY) and Clarksville (TN) area, drop by or contact the local Lee Brick and Block office today.

Pine Hall Brick’s Sedgefield Gives This Homeowner A Great Look

 

This homeowner has a great looking house because they selected a great looking brick. The Pine Hall Brick Sedgefield, supplied by the Owensboro (KY) location of Lee Brick and Block is a very versatile brick that works well with a variety of trim and roofing colors.

 

This close-up shot of the Sedgefield, by Pine Hall Brick, gives you an idea of the range of colors and the texture available to you when you use it for the exterior veneer of your next home building project.

 

This photo should give you some great ideas about what color trim, roofing and shutters to use to make your house the envy of the neighborhood.

Stop by the nearest location of Lee Brick and Block today to get more ideas about using brick on your next home building project and to see the full line of Pine Hall Brick.

Strategic Marketing’s New Louisville Location

 

Strategic Marketing recently moved into their new Louisville (KY) location. The building project was designed by Bayus Design Works, a local architectural firm.

The general contractor on this project, Holloway-Arnold Construction, also of Louisville, employed Mark Hendren and his Lay-Em All Masons team.

You can click on any of the photos to bring up a full-screen view.

The face brick you see in the photo above is Cranbrook from Hanson Brick and was supplied, along with all the other masonry materials, by the Louisville location of Lee Brick and Block.

There were over 40,000 Cranbrook face brick used on this project and over 3000 SF of concrete masonry units.

The concrete masonry units in the photos above are 4″ X 8″ X 16″ Normal Weight Light Range Buff for the stretcher units and 4″ X 4″ X 16″ units for the sills, also Light Range Buff units.

The mortar is Brixment’s B-133.

 

Lee Brick and Block would like to thank Bayus Design Works, Holloway-Arnold Construction and Lay-Em All Mason’s for choosing our masonry materials and for a job well done.

For more information on using Hanson’s Cranbrook, Brixment’s B-133 or Light Range Buff concrete masonry units, stop by your nearest location of Lee Brick and Block today.

Belden Brick Used On Bowling Green (KY) Jr. High

 

 

Bowling Green (KY) recently built a new Jr. High School and the project architect, Ross-Tarrant Architects of Lexington (KY), selected 2 different brick from Belden Brick as part of their exterior veneer.

Belden’s Sea Gray Velour and 671 Velour were chosen as the field and accent brick, along with a Chocolate splitface concrete block.

 

 

Here’s a close-up of the Belden Sea Gray Velour.

Click on the photo for a larger view.

 

 

 

 

Here’s a close-up of the Belden 671 Velour.

Click on the photo for a larger view.

 

 

 

The masonry contractor, Whit-Cor Masonry of Murray (KY), enhanced the project with the great corner details like the ones you see in the photo below. The general contractor, Alliance Corporation of Glasgow (KY) made sure the project was completed on-time and that this school was ready to serve the students of this Warren County town.

 

The accent brick were inset and outset from the field brick and the Trenwyth groundface block with the 8″X8″ look were used to transition from the field brick into the large panel of accent brick.

 

This close-up shows the inset Belden 671 Velour accent brick in a soldier course, the Belden Sea Gray Velour field brick and the Chocolate splitface concrete blocks that were used on this project.

The local Lee Brick and Block office in Bowling Green (KY) supplied all of the masonry materials on this project and is proud to have been selected by Whit-Cor Masonry, Ross-Tarrant Architects and Belden Brick.

For more information on using Belden Brick to enhance your next building project, stop by your nearest location of Lee Brick and Block today.

Next Page »